Secured Trading Service

High-Density PE Polyethylene HDPE Virgin HDPE Granules Blow Molding Raw Plastic Material

Ningbo Shuyou Plasticization Co., Ltd.
  • Audited Supplier
  • 3 yrs

Contact Supplier

Still deciding? Get samples of $ !
Request Sample

Product Highlights

  • High Crystallinity: Crystallinity ranges from 80% to 90% for superior structural integrity.
  • Excellent Chemical Stability: Resistant to acids, alkalis, and salts; insoluble in organic solvents.
  • High Rigidity and Toughness: Superior mechanical strength, wear resistance, and creep properties.
  • Environmentally Friendly: Recyclable and reusable thermoplastic material.
  • Low Water Absorption: Film has low permeability to water vapor and air.
  • Customized Appearance: Appearance can be customized to meet specific requirements.
  • Fast Delivery: Delivery time is 7-10 workdays for standard orders.

Shipping

Shipping Cost:
Contact the supplier about freight and estimated delivery time.

Online Trading Protection

Payment Guarantee
T/T PayPal ApplePay GooglePay visa mastercard american express discover JCB diners club PIX SPEI OXXO PSE OZOW Platform-protected payments with refund support for eligible order issues.
Platform Logistics
Clearer shipment tracking with platform-supported logistics.
Inspection Service
Optional pre-shipment inspection for quality and quantity checks.
After-Sales & Dispute Handling
Platform-assisted dispute resolution, including refunds or returns when applicable.

Only orders placed and paid through Made-in-China.com Secured Trading are eligible for payment protection and the corresponding platform services.

Product Images of High-Density PE Polyethylene HDPE Virgin HDPE Granules Blow Molding Raw Plastic Material

High-Density PE Polyethylene HDPE Virgin HDPE Granules Blow Molding Raw Plastic Material
High-Density PE Polyethylene HDPE Virgin HDPE Granules Blow Molding Raw Plastic Material pictures & photos
High-Density PE Polyethylene HDPE Virgin HDPE Granules Blow Molding Raw Plastic Material
High-Density PE Polyethylene HDPE Virgin HDPE Granules Blow Molding Raw Plastic Material pictures & photos
High-Density PE Polyethylene HDPE Virgin HDPE Granules Blow Molding Raw Plastic Material
High-Density PE Polyethylene HDPE Virgin HDPE Granules Blow Molding Raw Plastic Material pictures & photos
High-Density PE Polyethylene HDPE Virgin HDPE Granules Blow Molding Raw Plastic Material
High-Density PE Polyethylene HDPE Virgin HDPE Granules Blow Molding Raw Plastic Material pictures & photos
High-Density PE Polyethylene HDPE Virgin HDPE Granules Blow Molding Raw Plastic Material
High-Density PE Polyethylene HDPE Virgin HDPE Granules Blow Molding Raw Plastic Material pictures & photos
High-Density PE Polyethylene HDPE Virgin HDPE Granules Blow Molding Raw Plastic Material
High-Density PE Polyethylene HDPE Virgin HDPE Granules Blow Molding Raw Plastic Material pictures & photos
High-Density PE Polyethylene HDPE Virgin HDPE Granules Blow Molding Raw Plastic Material
  • High-Density PE Polyethylene HDPE Virgin HDPE Granules Blow Molding Raw Plastic Material
  • High-Density PE Polyethylene HDPE Virgin HDPE Granules Blow Molding Raw Plastic Material
    High-Density PE Polyethylene HDPE Virgin HDPE Granules Blow Molding Raw Plastic Material
  • High-Density PE Polyethylene HDPE Virgin HDPE Granules Blow Molding Raw Plastic Material
    High-Density PE Polyethylene HDPE Virgin HDPE Granules Blow Molding Raw Plastic Material
  • High-Density PE Polyethylene HDPE Virgin HDPE Granules Blow Molding Raw Plastic Material
    High-Density PE Polyethylene HDPE Virgin HDPE Granules Blow Molding Raw Plastic Material
  • High-Density PE Polyethylene HDPE Virgin HDPE Granules Blow Molding Raw Plastic Material
    High-Density PE Polyethylene HDPE Virgin HDPE Granules Blow Molding Raw Plastic Material
  • High-Density PE Polyethylene HDPE Virgin HDPE Granules Blow Molding Raw Plastic Material
    High-Density PE Polyethylene HDPE Virgin HDPE Granules Blow Molding Raw Plastic Material
  • High-Density PE Polyethylene HDPE Virgin HDPE Granules Blow Molding Raw Plastic Material
    High-Density PE Polyethylene HDPE Virgin HDPE Granules Blow Molding Raw Plastic Material

Find Similar Products

Product Description

Product Description
High-Density PE Polyethylene HDPE Virgin HDPE Granules Blow Molding Raw Plastic Material
HDPE is a highly crystalline, non-polar thermoplastic resin. High-density polyethylene is a white powder granular product, non-toxic and odorless, with a density in the range of 0.940~0.976 g/cm3; a crystallinity of 80%~90%, a softening point of 125~135°C, and a service temperature of up to 100 ºC; melting temperature is 120~160ºC. For materials with larger molecules, the recommended melting temperature range is between 200~250ºC. It has good heat resistance and cold resistance, good chemical stability, high rigidity and toughness, and good mechanical strength. The dielectric properties and environmental stress cracking resistance are also good. The hardness, tensile strength and creep properties are better than low-density polyethylene; the wear resistance, electrical insulation, toughness and cold resistance are all better, but slightly worse than low-density insulation; the chemical stability is good, at room temperature Under certain conditions, it is insoluble in any organic solvent and resistant to corrosion by acids, alkalis and various salts; the film has low permeability to water vapor and air and low water absorption; poor aging resistance
High-density vinyl is an environmentally friendly material that can be recycled and reused when heated to its melting point. It should be noted that plastic raw materials can be divided into two major categories: "Thermoplastic" and "Thermosetting plastic". "Thermosetting plastic" becomes a solidified state after being heated to a certain temperature. Even if it is continued to be heated, it cannot change its state. Therefore, products with environmental issues are "thermosetting plastic" products (such as tires), not "thermoplastic plastic" products (such as plastic pallets Note: pallets are called "plywood" in Hong Kong and Macao), so not all " Plastic is not environmentally friendly
High-Density PE Polyethylene HDPE Virgin HDPE Granules Blow Molding Raw Plastic Material
High-Density PE Polyethylene HDPE Virgin HDPE Granules Blow Molding Raw Plastic Material


 
 
 
Product Parameters
Model NO. HDPE
Material High Density Polyethylene/HDPE
Plastic Properties After Heated Thermoplastic Plastics
Plastic Forming Method Extrusion
Origin China
 
Detailed Photos

High-Density PE Polyethylene HDPE Virgin HDPE Granules Blow Molding Raw Plastic MaterialHigh-Density PE Polyethylene HDPE Virgin HDPE Granules Blow Molding Raw Plastic Material

Packaging & Shipping

 

 

High-Density PE Polyethylene HDPE Virgin HDPE Granules Blow Molding Raw Plastic Material

 

Company Profile

High-Density PE Polyethylene HDPE Virgin HDPE Granules Blow Molding Raw Plastic Material

Ningbo Shu You plastic Co., LTD was established is a leading company specialized in producing plastic and rubber particles, such as HDPE, LDPE, LLDPE, PE, EVA, ABS, PVC..... and Contains all kinds of metals. So far, we hasoperations in 35 countries. The product quality has always been the best among Chinese suppliers. Relying on a comprehensive quality control system and professional advanced production equipment, we are able to actively meet the constantly changing needs of customers. We provide "high-quality products, high-quality services, competitive prices, and timely delivery" services, and we are now looking forward to better cooperation with overseas customers on the basis of mutual benefit. Welcome partners from all over the world to establish long-term cooperative relationships with our company.ABOUT Us

FAQ

High-Density PE Polyethylene HDPE Virgin HDPE Granules Blow Molding Raw Plastic Material

 
 

About the Supplier

Watch Video
Watch Video
Ningbo Shuyou Plasticization Co., Ltd.
Ningbo Shuyou Plasticization Co., Ltd.
Ningbo Shuyou Plasticization Co., Ltd.
Ningbo Shuyou Plasticization Co., Ltd.
Ningbo Shuyou Plasticization Co., Ltd.
Ningbo Shuyou Plasticization Co., Ltd.
Ningbo Shuyou Plasticization Co., Ltd.
Ningbo Shuyou Plasticization Co., Ltd.

About Our Factory & Business Background

Address
Ningbo, Zhejiang, China

FAQ

What is the density of this HDPE material?
The density ranges from 0.940 to 0.976 g/cm3.
Is this material recyclable?
Yes, it is an environmentally friendly thermoplastic that can be recycled and reused when heated to its melting point.
What is the minimum order quantity?
The MOQ is 1kg.
Can the appearance be customized?
Yes, the appearance is customized based on customer requirements.
How long does delivery take?
Delivery time is 7-10 workdays.
Is this material toxic?
No, it is non-toxic and odorless.
What is the package size?
The package is 25kg per bag.

Send your message to this supplier

Contact Information
Recipient
Message

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now